Five fireplace maintenance tips

As winter sets in every year, days become shorter, and keeping ourselves warm becomes imperative. That’s why we should maintain our fireplaces properly to use them in winters. Needless to say, the best time to inspect the hearths and chimneys of our fireplaces is fall. During this time, you can resolve all the possible faults of your fireplace. Some problems are too complex while other issues may be negligible. Depending on the problems the fireplace of your home has, you can seek professional assistance immediately. Alternatively, you can rely on a DIY approach too and resolve the potential flaws on your own. So, as you will read today’s post, you will know about some effective fireplace maintenance tips ahead. 

Importance of fireplaces 

When you install a fireplace at your home, you can expect many benefits. Starting from setting an upbeat atmosphere, and being eco-friendly to providing you with sufficient heat, the advantages are worth paying attention to. So, maintaining your fireplace impeccably is important. Plus, installing these fireplaces is quite easy. Some of the other advantages you can expect after installing a fireplace at your home can be considered below. 

It reduces the energy bills of your house to a reasonable extent 

The aesthetic, as well as the overall value of your home, will increase like anything and 

You will get adequate light and heat in case you face a sudden power-cut issue 

So, as a homeowner, you must get your furnace proper before winter arrives. That’s why it’s always good to resolve all the issues with your fireplace during the fall season. Having said that, below are five fireplace maintenance tips for you to consider. 

Diagnose the present working condition of your fireplace 

Inspect the brickwork of your fireplace well. This way, you can identify wears it has got. Also, diagnose the damper of your fireplace without a miss. Make sure that the damper is opening and closing without any difficulty. On the top of the damper, you will see that there is a smoke chamber. Check this part of your chimney properly as well. This is because the deposition of soot might develop there with time. So, have you found any of these errors in your perfectly operating fireplace? Then, call a team of chimney professionals right now. They are efficient at diagnosing these signs and resolving them accordingly. 

Check out whether the flue is in a dire condition or sooty 

First of all, you need to open the clean-out door of your flue’s base. You will find it either outside your home or inside the basement only. Then, use a small mirror as well as a flashlight to look for any soot deposition in the flue. Besides, check out whether there are any separations, hollows or cracks in the flue or not. A lot of times, this kind of task is easier said than done. If the same is the case with you, then, get professional assistance as soon as possible. Rest assured that these professionals have sufficient expertise and knowledge in inspecting the flue properly. After that, they will give it the much-needed services, so that your sooty starts working normally in no time. 

Find out stains or leaks on the roof about the chimney 

There is no doubt that the chimney of your fireplace is the most important part of it. So, inside your home, look for any kind of dampness or stains all-around your chimney. This is one of the most crucial fireplace maintenance tips for homeowners like you. There are many reasons for which these issues can occur with the chimney of your fireplace. 

Dodgy chimney flashing 

One of the main reasons can be flashing about the chimney at its roofline which is in a poor condition. Alternatively, the same situation can be triggered by a faulty flue liner as well. Also, it is not uncommon to see tell-tale water-related signs around the chimney of your fireplace. In case, you are seeing such signs too, you should resolve these issues as soon as possible. So, the best option is to call a team of professionals who can fix your chimney to its best ability. 

Replace or install the cap of your chimney 

A great way to maintain your fireplace faultlessly is by installing a high-quality chimney cap for your fireplace. This is because certain damages caused by the wildlife and water can affect your chimney greatly. A good-quality chimney cap once installed will protect your fireplace from these kinds of dangers. Again, snow and rain can hamper an uncapped chimney once they enter it. Since they freeze and then thaw, these climatic hazards can cause expansion damage too. 

Pest build-up 

Furthermore, tiny wildlife creatures can make nests in the chimney of your fireplace. These disease-spreading pests like worms, ticks and fleas will subsequently get into your house and will become a source of various ailments for you and your family members. That’s why replacing your chimney cap is the best option to choose in this matter. It will keep all kinds of harmful animals out of your home. Likewise, it will also protect your roof from sparks and embers. 

Diagnose the exterior of your chimney 

Inspect your chimney through and through from its exterior. Do you see any masonry joints or chipped bricks on its surface? Is it leaning to a great extent? Have you come across any cracks and holes until recently? Also, look for any loose portions, stains or corrosion if your chimney is made up of a factory-manufactured material. Is the chimney of your fireplace exposed to the attic of your home? If so, then, do diagnose that area properly too. In case, you are coming across these tell-tale signs, rest assured that it’s time for you to repair your chimney right away. 

Final Words! 

By implementing useful fireplace maintenance tips like the ones above, you can keep your fireplace in outstanding condition throughout the year. Apart from that, to buy top-quality fireplaces, get in touch with Sunteck, the best fireplace selling company in Canada.